Investment Recovery & Recycling Services Department
4651 Crossroads Park Drive • Liverpool NY 13088-3515
Tim Felasco • 315 460-2947 • Cell Phone 315 952-3801 • Fax 315 457-4325

UPDATED 07/05/2011 11:36 PM

NEW SURPLUS FOR SALE

 Gas Materials

Total:  48
(INTERNAL USE ONLY)

Please click on photo
for a larger view!

QTY

 UOM

DESCRIPTION

MFR & ID #

PS
NIS

WHSE LOC

 NY
NE

IMG STATUS
SELL/HOLD/
SR#

6009165		 10 ea. VENT, REGULATOR, 1IN FPT INLET, RELIEF CAST ALUMINUMBUG PROOF SCREENED OUTLET MECHSPEC NM6009165 NIS I10 F3 NY S - 06/16/09, Qty All (Less than Std Pkg).

6010200		 9 ea. CLAMP, BELL JOINT, CAST IRON, 6IN (6.90IN O.D.) WITH TWO BOLTED SECTIONAL RINGS, ONE PIECE GASKET AND COATED WITH 10 MILS OF EPOXY, M.I. IN COMPLIANCE WITH SYSTEM SPECIFICATION G-1096, LATEST REVISION DRESSER 01600008206 PS I5 F4 NY S - 06/15/09, Qty All. (Item ID Being Discontinued.)

6010209		 12 ea. CLAMP, BELL JOINT, CAST IRON, 3IN (3.0IN O.D.) WITH TWO BOLTED SECTIONAL RINGS, ONE PIECE GASKET AND COATED WITH 10 MILS OF EPOXY, M.I. IN COMPLIANCE WITH SYSTEM SPECIFICATION G-1096, LATEST REVISION DRESSER (O) 0060-0001-003 PS I5 F4 NY S - 06/15/09 - Mfr Part Number is Obsolete.

6010204		 6 ea. CLAMP, BELL JOINT, CAST IRON, 4IN (4.80IN O.D.) WITH TWO BOLTED SECTIONAL RINGS, ONE PIECE GASKET AND COATED WITH 10 MILS OF EPOXY, M.I. IN COMPLIANCE WITH SYSTEM SPECIFICATION G-1096, LATEST REVISION DRESSER 0160-0004-206 PS I5 F4 NY S - 06/15/09, Qty All. (Item ID Being Discontinued.)

6010202		 3 ea. CLAMP, BELL JOINT, CAST IRON, 8IN (9.05IN O.D.) WITH TWO BOLTED SECTIONAL RINGS, ONE PIECE GASKET AND COATED WITH 10 MILS OF EPOXY, M.I. IN COMPLIANCE WITH SYSTEM SPECIFICATION G-1096, LATEST REVISION DRESSER 01600012206 PS I5 F4 NY S - 06/15/09, Qty All. (Item ID Being Discontinued.)

5985784		 35 ea. CLAMP, STRAIN, ALUMINUM, 15000 LB, STRAIGHT 336.4-1000KCMIL, RANGE 0.666-1.153 IN. MACLEAN HDSO-116 NIS I8 D3 NY S - 07/15/09, Remaining Qty 35 (Sufficient Stock Levels on Hand)

5985905		 7 ea. CLAMP, STRAIN, 2/0 SOLID TO 4/0 STRANDED CONDUCTOR, GALV CLAMP, 12000 LB CAPACITY, STRAIGHT LINE DEADEND FOR USE ON COPPER AND COPPERWELD CONDUCTORS, CLAMPING RANGE 0.36 TO 0.60 INCHES, STAINLESS STEEL HUMPBACK COTTER PIN WITH OFFSET LEGS. MACLEAN SDE-73F NIS R1 A2 NE S - 07/15/09, Qty All (Less than Standard Package).

5108608		 7 ea. CLAMP, STRAIN, 8000 LB DEADEND, STRAIGHT, CLAMPING RANGE . 502 TO .814IN, AAC 4/0 - 4 77, KCMIL , AAAC - 4/0 - 477 KCMIL, ACSR - 4/0 - 477 (18 /1), WIT MACLEAN ASO-858-2 NIS R1 A2 NE S - 7/15/09, Qty All (No usage history in NE).

5106198		 25 ea. CLAMP, HOT LINE, 8 SOL TO 2/0 CU LINE, 8 SOL TO 2/0 CU TAP BLACKBURN HLC2108 NIS R2 B2 NE S - 07/15/09, Qty All (Sufficient Stock Level, Slow Moving Item)

5987003		 18 ea. CLAMP, POST INSULATING, PINTLE BOLT, CONDUCTOR SIZE 0.25IN-0.56IN DIA , GALV STEEL FERROUS LAPP 47101 NIS R2 B2 NE S - 07/15/09, Qty All (Less than Std Pkg, Sufficient Stock Level, Slow Moving Item)

5985660		 25 ea. CLAMP, STRAIN, ALUM, 35,000LB CAPACITY, 5 U-BOLTS, 0.71 - 1.42IN RANGE, WITH SOCKET EYE ANDERSONE SD-130S NIS R3 B3 NE S - 07/15/09, Qty All (Sufficient Stock Level, Slow Moving Item)

3506444		 10 ea. CLAMP, POST INSULATOR, HEAT TREATED ALUMINUM ALLOY BODY, HOT DIP GALV STEEL HARDWARE WITH ONE (1) STAINLESS STEEL ANTI-STATIC SPRING, CLAMP RANGE OF .35IN - .84IN FOR 1/0 THRU 336.4 STR AL OR ACSR. MACLEAN ACTS-084-SL-1 NIS I9 B2 NY S - 06/16/09, Qty All (Less than Std Pkg).

3504550		 4 ea. CLAMP, SUSPENSION, ALUMINUM; ASSEMBLED WITH HOT DIPPED GALV IRON SOCKET FITTING; CLEVIS PIN, U-BOLTS, NUTS, AND WASHERS OF GALV STEEL; AND COTTER PIN OF STAINLESS STEEL, FOR 336.4 KCM AAC OR ACSR 0.40IN TO 0.80IN, 17000LB MIN ULTIMATE STRENGTH. 3506444ANDERSONE HAS-85-S NIS I8 A4 NY S - 06/16/09, Remaining 4 Units (Less than Std Pkg).

1 ea. CLAMP, BELL JOINT, CAST IRON, 3IN (3.0IN O.D.) WITH TWO BOLTED SECTIONAL RINGS, ONE PIECE GASKET AND COATED WITH 10 MILS OF EPOXY, M.I. IN COMPLIANCE WITH SYSTEM SPECIFICATION G-1096, LATEST REVISION DRESSER (O)0060-0001-003 NIS I9 A4 NY S - 07/29/09, Manufacturer Part Number Obsolete/Item ID Inactive

6010202		 4 ea. CLAMP, BELL JOINT, CAST IRON, 6IN (6.90IN O.D.) WITH TWO BOLTED SECTIONAL RINGS, ONE PIECE GASKET AND COATED WITH 10 MILS OF EPOXY, M.I. IN COMPLIANCE WITH SYSTEM SPECIFICATION G-1096, LATEST REVISION DRESSER 01600012206 NIS I9 A4 NY S - 07/29/09, Item ID Inactive

6010204		 10 ea. CLAMP, BELL JOINT, CAST IRON, 4IN (4.80IN O.D.) WITH TWO BOLTED SECTIONAL RINGS, ONE PIECE GASKET AND COATED WITH 10 MILS OF EPOXY, M.I. IN COMPLIANCE WITH SYSTEM SPECIFICATION G-1096, LATEST REVISION DRESSER 0160-0004-206 NIS I9 A4 NY S - 07/29/09, Item ID Inactive

3502812		 35 ea. CLAMP, MESSENGER SUPPORT, 3/8IN-1/2IN, 0 DEG- 60 DEG, 5/8IN MOUNTING BOLT MACLEAN (O)MB-62 NIS R4 E2 NE S - 07/29/09, Manufacturer Part Number Obsolete

5986308		 5 ea. CLAMP, SINGLE TONGUE, ADJUSTABLE CLEVIS, BOLTED JUMPER, 336.4 KCM ACSR, 26/7, ALUM DE COMP LINNET FARGO A0908-13 NIS R4 E2 NE S - 07/29/09, Less than Standard Package

6010203		 1 ea. CLAMP, BELL JOINT, CAST IRON, 12IN (13.20IN O.D.)WITH TWO BOLTED SECTIONAL RINGS, ONE PIECE GASKET AND COATED WITH 10 MILS OF EPOXY, M.I. IN COMPLIANCE WITH SYSTEM SPECIFICATION G-1096, LATEST REVISION DRESSER 0160-0020-206 NIS I10 C2 NY S - 07/29/09, Item ID Inactive

KEARNEY-CLAMPS		 24 ea. GROUNDING CLAMPS, TOW & FLAT  FACE EYESCREW OR F-HANDLE (BRONZE OR COPPER) KEARNEY NIS R4 E2 NE 22

CECO-SGD-60-4D		 280 ea. D.E. CLAMPS CECO SGD-60-4D NIS R3 F3 NE 20

CHANCE-S1520		 10 ea. HOT LINE CLAMP CHANCE S1520 NIS R4 E2 NE 26

6010208		 1 ea. CLAMP, BELL JOINT, CAST IRON, 10IN (11.10IN O.D.)WITH TWO BOLTED SECTIONAL RINGS, ONE PIECE GASKET AND COATED WITH 10 MILS OF EPOXY, M.I. IN COMPLIANCE WITH SYSTEM SPECIFICATION, LATEST REVISION DRESSER 00600013205 NIS I9 E3 NY S - 07/29/09, Item ID Inactive

3502812		 7 ea. CLAMP, MESSENGER SUPPORT, 3/8IN-1/2IN, 0 DEG- 60 DEG, 5/8IN MOUNTING BOLT CHANCE ASC-2 NIS R4 E2 NE S - 7/29/09, Remaining 7 units (Less than Standard Package).

3506783		 1 ea. CLAMP, STRAIN, DEADEND, AL BODY COMPLETE W/SKT FITTING, QUADRANT TYP OR TRUNNION TYPE. INCLUDES AL BODY; CLEVIS PIN, U-BOLTS, NUTS, WASHERS OF HOT DIP GS; COTTER PIN OF SS;, SKT FITTING OF HOT DIP GALV DI FOR CLASS 52-3, 52-5INSUL. USAGE FOR 336.4 RANG PERFORMLP ASD-94-S NIS I9 A3 NY S - 08/03/09, Qty All. (Less than Std Package)

3504562		 2 ea. CLAMP, SUSPENSION, ALUMINUM; ASSEMBLED WITH HOT DIPPED GALV IRON SOCKET FITTING; CLEVIS PIN, U-BOLTS, NUTS, AND WASHERS OF GALV STEEL; COTTER PIN OF STAINLESS STEEL, FOR 1192.5 KCM 45/7 ACSR (.90IN TO1.39IN), 25000NO. MIN ULTIMATE STRENGTH. ANDERSONE HAS-139-S NIS R2 B3 NE S - 08/03/09, Qty All. (Less than Std Package)

9201457		 30 ea. CLAMP, MID-SPAN, 1/0 SECONDARY NEUTRAL TO SERVICE MESSENGER MACLEAN MSD-4 NIS I9 A3 NY S - 08/03/09, Qty All. (Sufficient Quantities on Hand as compared to usage.)

3503067		 7 ea. CLAMP, CONDUIT GRND, 6IN, HD, CORROSIVE RESIST W/SILICONE BRZ HDWR, FURN WITH A MECH GRND CBL CONN PERM THE GRND CBL TO BE ATTAC EITHER PARRA WITH OR AT RT ANG TO THE STL CONDUIT HAVING A CBL RNG OF #4 SOLID TO #4/O STR AWG THOMASBETT (O)3906-BU PS I5 E2 NY S - 10/06/09, Qty All. (Mfr Item Id is Obsolete).

5986470		 30 ea. CLAMP, MESSENGER/SHIELD WIRE, 5/16IN-1/2IN, GALV STEEL, MEDIUM DUTY, AERIAL MESSENGER CABLE, 5/8IN MOUNTING BOLT JOSLYN PA192A NIS R2 A4 NE S - 10/06/09, Qty All (Less than Standard Package)

3503393		 13 ea. CLAMP, GUY, PARALLEL GROOVE, DEAD-END, 6IN LONG X 1-21/32IN WIDE, (3) 5/8IN BOLTS, 5/16IN-1/2IN STRAND RANGE, HOT DIPPED GALVANIZED STEEL. NEMA STD. PH-23. 1964. CHANCE 6461 NIS I10 D3 NY S - 10/06/09, Qty All (Less than Standard Package)

25 ea. CLAMP, MESSENGER SUPPORT, 3/8IN-1/2IN, 0 DEG- 60 DEG, 5/8IN MOUNTING BOLT MACLEAN (O)MB-62 NIS I9 C4 NY S - 10/06/09, Qty All (Mfr Part Number is Obsolete).

3506444		 10 ea. CLAMP, POST INSULATOR, HEAT TREATED ALUMINUM ALLOY BODY, HOT DIP GALV STEEL HARDWARE WITH ONE (1) STAINLESS STEEL ANTI-STATIC SPRING, CLAMP RANGE OF .35IN - .84IN FOR 1/0 THRU 336.4 STR AL OR ACSR. ANDERSONE TSCB6ARIV NIS I9 C4 NY S - 10/06/09, Qty All (Less than Standard Package)

3503390		 3 ea. CLAMP, GROUND ROD, COPPER, 5/8IN - 3/4IN, FOR 2/0 SOL - 250KCMIL. INCLUDES BRONZE HARDWARE. BURNDY GAR6429 NIS I9 C4 NY S - 10/06/09, Qty All (Sufficient Stock on Hand)

6010210		 10 ea. CLAMP, BELL JOINT, CAST IRON, 16IN (17.40IN O.D.)WITH TWO BOLTED SECTIONAL RINGS, ONE PIECE GASKET AND COATED WITH 10 MILS OF EPOXY, M.I. IN COMPLIANCE WITH SYSTEM SPECIFICATION G-1096, LATEST REVISION DRESSER 01600028206 PS I5 C2 NY S - 10/06/09, Qty All (Item ID Inactive)

6010259		 5 ea. CLAMP, BELL JOINT, CAST IRON, 24IN (25.80IN O.D.)WITH TWO BOLTED SECTIONAL RINGS, ONE PIECE GASKET AND COATED WITH 10 MILS OF EPOXY, M.I. IN COMPLIANCE WITH SYSTEM SPECIFICATION G-1096, LATEST REVISION DRESSER 00600033205 PS I5 C2 NY S - 10/06/09, Qty All (Item ID Inactive)

6010208		 2 ea. CLAMP, BELL JOINT, CAST IRON, 10IN (11.10IN O.D.)WITH TWO BOLTED SECTIONAL RINGS, ONE PIECE GASKET AND COATED WITH 10 MILS OF EPOXY, M.I. IN COMPLIANCE WITH SYSTEM SPECIFICATION, LATEST REVISION DRESSER 00600013205 PS I4 D2 NY S - 10/06/09 (Item ID Inactive)

6010203		 9 ea. CLAMP, BELL JOINT, CAST IRON, 12IN (13.20IN O.D.)WITH TWO BOLTED SECTIONAL RINGS, ONE PIECE GASKET AND COATED WITH 10 MILS OF EPOXY, M.I. IN COMPLIANCE WITH SYSTEM SPECIFICATION G-1096, LATEST REVISION DRESSER 0160-0020-206 PS I4 A4 NY S - 10/06/09 (Item ID Inactive)

6010152		 14 ea. CLAMP, BELL JOINT, CAST IRON, 20IN (21.60IN O.D.)WITH TWO BOLTED SECTIONAL RINGS, ONE PIECE GASKET AND COATED WITH 10 MILS OF EPOXY, M.I. IN COMPLIANCE WITH SYSTEM SPECIFICATION G-1096, LATEST REVISION DRESSER 00600028205 PS I4 E4 NY S - 10/06/09, Qty All (Item ID Inactive)

2023529		 12 ea. FITTING, END, FUSE, 14.4KV, 200AMP, SM-20 FUSE TYPE WITH SILENCER SCELECTRIC 3097 NIS I8 D3 NY S - 10/15/09, Qty All (WH's are adequately stocked with no outstanding demand.)

6010208		 2 ea. CLAMP, BELL JOINT, CAST IRON, 10IN (11.10IN O.D.)WITH TWO BOLTED SECTIONAL RINGS, ONE PIECE GASKET AND COATED WITH 10 MILS OF EPOXY, M.I. IN COMPLIANCE WITH SYSTEM SPECIFICATION, LATEST REVISION DRESSER 00600013205 NIS I8 I4 NY S - 11/23/09 - Qty All (Item Id Inactive)

6010202		 4 ea. CLAMP, BELL JOINT, CAST IRON, 8IN (9.05IN O.D.) WITH TWO BOLTED SECTIONAL RINGS, ONE PIECE GASKET AND COATED WITH 10 MILS OF EPOXY, M.I. IN COMPLIANCE WITH SYSTEM SPECIFICATION G-1096, LATEST REVISION DRESSER 01600012206 NIS I8 I4 NY S - 11/23/09 - Qty All (Item Id Inactive)

6010204		 3 ea. CLAMP, BELL JOINT, CAST IRON, 4IN (4.80IN O.D.) WITH TWO BOLTED SECTIONAL RINGS, ONE PIECE GASKET AND COATED WITH 10 MILS OF EPOXY, M.I. IN COMPLIANCE WITH SYSTEM SPECIFICATION G-1096, LATEST REVISION DRESSER 0160-0004-003 NIS I8 I4 NY S - 11/23/09 - Qty All (Item Id Inactive)

6010210		 4 ea. CLAMP, BELL JOINT, CAST IRON, 16IN (17.40IN O.D.)WITH TWO BOLTED SECTIONAL RINGS, ONE PIECE GASKET AND COATED WITH 10 MILS OF EPOXY, M.I. IN COMPLIANCE WITH SYSTEM SPECIFICATION G-1096, LATEST REVISION DRESSER 01600028003 NIS I8 I4 NY S - 11/23/09 - Qty All (Item Id Inactive)

6008601		 10 ea. VALVE, PLUG, PLASTIC, 1/2IN CTS, MECHANICAL STAB TYPE ENS FOR .062IN WALL TUBING, MUST BE CERTIFIED TO D.O.T. 192, ASTM D2513 AND HAVE A M.O.P. RATING TO 100 PSI ELSTER/PERFECTION 45050 NIS I3 F2 NY S - 1/11/10, Qty All (Item ID Inactive)

0802591		 68 ea. VALVE, EXCESS FLOW, FOR 1/2IN CTS WITH .062INSERT STIFFENER, TYPE, PE 3408 MATERIAL, STICK TYPE, BROWN LABEL 550, INSTALLED IN A PERFECTION PARMASERT COUPLING WITH DIRECTION LABEL FOR ATTACHMENT TO RISER ELSTER/PERFECTION (O) 51564 NIS I3 F2 NY S - 1/11/10, Qty All (Item ID Inactive)

9201105		 106 ea. VALVE, PNEUMATIC, REMOTE SHUT-OFF, NICKLE PLATED BRASS, 1IN NPT, 60 PSIG, WITH LOCKBOX AND 40 FEET OF CAPILLARY TUBE BUFFGAUGE MNEUNCFB10040CV NIS I3 F2 NY S - 1/28/10, Qty All (Item ID Inactive)

0811213		 10 ea. VALVE, PNEUMATIC, REMOTE SHUT-OFF, NICKLE PLATED BRASS, 3/4IN NPT, 60 PSIG, WITH LOCKBOX AND 20 FEET OF CAPILLARY TUBE. BUFFGAUGE MNEU-NC-B-B-074-20 PS I5 E2 NY S - 1/28/10, Qty All (Item ID Inactive)

0811212		 164 ea. VALVE, PNEUMATIC, REMOTE SHUT-OFF, NICKLE PLATED BRASS, 1IN NPT, 60 PSIG, WITH LOCKBOX AND 20 FEET OF CAPILLARY TUBE BUFFGAUGE MNEU-NC-100-20-1-CV PS I3 C3 NY S - 1/28/10, Qty All (Item ID Inactive)